A coil of wire having finite inductance and resistance has a conducting ring placed coaxially within it. The coil is connected to a battery at time t = 0 so that a time-dependent current I1(t) starts flowing through the coil. If I2(t) is the current induced in the ring and B(t) is the magnetic field at the axis of the coil due to I1(t), then as a function of time (t > 0), the product I2 (t) B(t

(1) Increases with time

(2) Decreases with time

(3) Does not vary with time

(4) Passes through a maximum

Subtopic:  LR circuit |
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints

Two circular coils can be arranged in any of the three situations shown in the figure. Their mutual inductance will be 

(1) Maximum in situation (A)

(2) Maximum in situation (B)

(3) Maximum in situation (C)

(4) The same in all situations

Subtopic:  Mutual Inductance |
 74%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A conducting rod of length 2l is rotating with constant angular speed ω about its perpendicular bisector. A uniform magnetic field B exists parallel to the axis of rotation. The e.m.f. induced between two ends of the rod is 

(1) BΩl2

(2) 12Bωl2

(3) 18Bωl2

(4) Zero

Subtopic:  Motional emf |
 56%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

As shown in the figure, P and Q are two coaxial conducting loops separated by some distance. When the switch S is closed, a clockwise current IP flows in P (as seen by E) and an induced current IQ1 flows in Q. The switch remains closed for a long time. When S is opened, a current IQ2 flows in Q. Then the directions of IQ1 and IQ2 (as seen by E) are 

(1) Respectively clockwise and anticlockwise

(2) Both clockwise

(3) Both anticlockwise

(4) Respectively anticlockwise and clockwise

Subtopic:  Faraday's Law & Lenz Law |
 64%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A conducting wireframe is placed in a magnetic field that is directed into the paper. The magnetic field is increasing at a constant rate. The directions of induced current in wires AB and CD are:

1. B to A and D to C
2.  A to B and C to D
3.  A to B and D to C
4. B to A and C to D

Subtopic:  Faraday's Law & Lenz Law |
 61%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A square metallic wire loop of side 0.1 m and resistance of \(1~\Omega\) is moved with a constant velocity in a magnetic field of \(2~\mathrm{wb/m^2}\) as shown in the figure. The magnetic field is perpendicular to the plane of the loop and the loop is connected to a network of resistances. What should be the velocity of the loop so as to have a steady current of 1 mA in the loop?

   

1. 1 cm/sec 2. 2 cm/sec
3. 3 cm/sec 4. 4 cm/sec
Subtopic:  Motional emf |
 76%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A conductor ABOCD moves along its bisector with a velocity of 1 m/s through a perpendicular magnetic field of 1 wb/m2, as shown in fig. If all the four sides are of 1m length each, then the induced emf between points A and D is

(1) 0

(2) 1.41 volt

(3) 0.71 volt

(4) None of the above

Subtopic:  Motional emf |
 70%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A conducting rod PQ of length L = 1.0 m is moving with a uniform speed v = 2 m/s in a uniform magnetic field B = 4.0 T directed into the paper. A capacitor of capacity C = 10 μF is connected as shown in figure. Then

(1) qA = + 80 μC and qB = – 80 μC

(2) qA = – 80 μC and qB = + 80 μC

(3) qA = 0 = qB

(4) Charge stored in the capacitor increases exponentially with time

Subtopic:  Motional emf |
 74%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The resistance in the following circuit is increased at a particular instant. At this instant the value of resistance is 10 Ω. The current in the circuit will be:

1. i = 0.5 A

2. i > 0.5 A

3. i < 0.5 A

4. i = 0

Subtopic:  LR circuit |
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

Shown in the figure is a circular loop of radius r and resistance R. A variable magnetic field of induction B = B0et is established inside the coil. If the key (K) is closed, the electrical power developed right after closing the switch, at t=0, is equal to

(1) B02πr2R

(2) B010r3R

(3) B02π2r4R5

(4) B02π2r4R

Subtopic:  Faraday's Law & Lenz Law |
 62%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh