The resistance of an ideal voltmeter is 

(1) Zero

(2) Very low

(3) Very large

(4) Infinite

Subtopic:  Conversion to Ammeter & Voltmeter |
 67%
From NCERT
PMT - 1998
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The net resistance of a voltmeter should be large to ensure that :

1. It does not get overheated
2. It draws excessive current
3. It can measure large potential difference
4. It does not appreciably change the potential difference to be measured
Subtopic:  Conversion to Ammeter & Voltmeter |
 51%
From NCERT
PMT - 1999
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A galvanometer having a resistance of 8 ohms is shunted by a wire of resistance 2 ohms. If the total current is 1 amp, the part of it passing through the shunt will be :

(1) 0.25 amp

(2) 0.8 amp

(3) 0.2 amp

(4) 0.5 amp

Subtopic:  Conversion to Ammeter & Voltmeter |
 64%
From NCERT
PMT - 1998
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A voltmeter of resistance 1000 Ω gives full-scale deflection when a current of 100 mA flow through it. The shunt resistance required across it to enable it to be used as an ammeter reading 1 A at full-scale deflection is :

(1) 10000 Ω

(2) 9000 Ω

(3) 222 Ω

(4) 111 Ω

Subtopic:  Moving Coil Galvanometer |
 70%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

If an ammeter A reads 2 A and the voltmeter V reads 20 V, what is the value of resistance R? (Assuming finite resistances of ammeter and voltmeter)
     

1. Exactly 10 ohm
2. Less than 10 ohm
3. More than 10 ohm
4. We cannot definitely say

Subtopic:  Conversion to Ammeter & Voltmeter |
From NCERT
PMT - 2004
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A galvanometer has a resistance of 25 ohm and a maximum of 0.01 A current can be passed through it. In order to change it into an ammeter of range 10 A, the shunt resistance required is 

(1) 5/999 ohm

(2) 10/999 ohm

(3) 20/999 ohm

(4) 25/999 ohm

Subtopic:  Conversion to Ammeter & Voltmeter |
 84%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A galvanometer has 30 divisions and a sensitivity 16μA/div. It can be converted into a voltmeter to read 3 V by connecting (approximately):

(1) Resistance nearly 6 k Ω in series

(2) 6 k Ω in parallel

(3) 500 Ω in series

(4) It cannot be converted

Subtopic:  Conversion to Ammeter & Voltmeter |
 66%
From NCERT
PMT - 2005
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A voltmeter has a range 0-V with a series resistance R. With a series resistance 2R, the range is 0-V'. The correct relation between V and V' is :

(1) V'=2V

(2) V'>2V

(3) V'>>2V

(4) V'<2V

Subtopic:  Conversion to Ammeter & Voltmeter |
From NCERT
PMT - 2001
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

If an ammeter is to be used in place of a voltmeter then we must connect with the ammeter a :

(1) Low resistance in parallel

(2) High resistance in parallel

(3) High resistance in series

(4) Low resistance in series

Subtopic:  Conversion to Ammeter & Voltmeter |
 50%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A galvanometer with a resistance of 36 Ω is changed into an ammeter by using a shunt of 4 Ω. The fraction f0 of total current passing through the galvanometer will be:

1. 140

2. 14

3. 1140 

4. 110

Subtopic:  Conversion to Ammeter & Voltmeter |
 78%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh