The value of Poisson's ratio cannot be:

(1) 0.05

(2) 0.32

(3) 0.63

(4) 0.49

Subtopic:  Poisson's Ratio |
 81%
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints

A steel wire of cross-sectional area 3 x 10-6 m2 can withstand a maximum strain of 10-3. If Young's modulus of steel is 2 x 1011 Nm-2, then maximum mass which the wire can hold is: (Take g =10 m/s2)

(1) 40 kg

(2) 100 kg

(3) 80 kg

(4) 60 kg

Subtopic:  Stress - Strain |
 85%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

If Poisson's ratio σ is 12 for material, then the material is

(1) Incompressible

(2) Elastic fatigue

(3) Compressible

(4) Plastic

Subtopic:  Poisson's Ratio |
 64%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A wire can bear maximum force F. A wire of same material but triple radius can bear the maximum force of:

(1) F

(2) 3F

(3) 9F

(4) 27 F

Subtopic:  Young's modulus |
 79%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

The increase in the length of a wire on stretching is \(0.04\)%. If Poisson's ratio for the material of wire is \(0.5,\) then the diameter of the wire will:

1. decrease by \(0.02\)%. 2. decrease by \(0.01\)%.
3. decrease by \(0.04\)%. 4. increase by \(0.03\)%.
Subtopic:  Poisson's Ratio |
 73%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A force applied on a brass wire of uniform cross-section area creates change in its length and cross-sectional area. If lateral strain produced in the wire is 3 x 10-2, then the energy stored per unit volume of wire will be: [Ybrass = 9 x 1010 N/m2, σbrass = 0.3]

(1) 275 MJ/m3

(2) 315 MJ/m3

(3) 450 MJ/m3

(4) 175 GJ/m3

Subtopic:  Potential energy of wire |
 74%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A uniform wire of length \(3\) m and mass \(10\) kg is suspended vertically from one end and loaded at another end by a block of mass \(10\) kg. The radius of the cross-section of the wire is \(0.1\) m. The stress in the middle of the wire is: (Take \(g=10\) ms-2)

1. \(1.4 \times10^4\) N/m2 2. \(4.8 \times10^3\) N/m2
3. \(96 \times10^4\) N/m2 4. \(3.5\times10^3\) N/m2
Subtopic:  Stress - Strain |
 66%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A uniform wire is held at one end and stretched by applying force at the other end. If the product of the length of wire and area of cross-section of the wire remains unchanged, then Poisson's ratio of material of the wire will be:

1. 0 2. 0.50
3. -0.5 4. Infinity

Subtopic:  Poisson's Ratio |
 60%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
Links
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

A wire is loaded by a block of mass 10 kg which results in an increase in its length by 10 cm. The work done by a gravitational force which increases the temperature of the wire is:

(1) 2.5 J

(2) 5 J

(3) 10 J

(4) 20 J

Subtopic:  Potential energy of wire |
 73%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh

Three identical balls of rubber, aluminium, and steel are dropped from the same height on a horizontal rigid surface. If Vrubber VAl, and Vsteel are their speeds just after the collision, then

(1) Vrubber = VAl = Vsteel

(2) Vrubber > VAl > Vsteel

(3) Vrubber < VAl < Vsteel

(4) Vrubber > VAl = Vsteel

Subtopic:  Elasticity |
 53%
From NCERT
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh
Hints
To view explanation, please take trial in the course.
NEET 2023 - Target Batch - Aryan Raj Singh